400ml Rust-Oleum Painters Touch Spray Paint multi-purpose Gloss / Satin / Matt


Painters Touch is a range of multi-purpose decorative and protective aerosol spray paints ideal for everyday projects.

Typical applications include painting of furniture, cabinets, doors, frames, vases, baskets, trim and general bric-a-brac.

Almond Gloss, 

Antique White Gloss, 

Apple Green Satin, 

Balmoral Gloss, 

Berry Pink Gloss, 

Black Gloss, 

Black Matt, 

Blossom White Satin, 

Brilliant Blue Gloss,  

Candy Pink Gloss

Cherry Red Gloss, 

Chestnut Gloss, 

Claret Wine Satin, 

Dark Grey Gloss, 

Deep Blue Gloss, 

Espresso Satin, 

Fossil Satin, 

French Lilac Satin, 

Heirloom White Satin, 

Ivory Bisque Gloss, 

Ivory Silk Satin, 

Khaki Gloss, 

Marigold Gloss, 

Meadow Green Gloss, 

Navy Blue Gloss, 

Nutmeg Satin, 

Oxford Green Satin, 

Paprika Satin, 

Purple Gloss, 

Racing Green Gloss, 

Real Orange Gloss, 

Sage Green Gloss, 

Slate Blue Satin, 

Spa Blue Gloss, 

Stone Grey Satin, 

Strawflower Satin, 

Sun Yellow Gloss, 

White Gloss, 

White Matt, 

White Satin, 

Winter Grey Gloss


- 400ml pack size.

- Available in 42 attractive colours.

- Range of gloss, satin and matt finishes.

- High quality, fast-drying formulation.

- Indoor and outdoor use.

- Smooth, durable finish.

Available in the following colours (all colours approximate).PAINTER’S TOUCH (MATT/SATIN/GLOSS FINISH) - USE ONLY AS DIRECTED.

Premium quality multi- purpose paint for use on virtually any surface.

Preparation: Ensure surfaces to be painted are free from any loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Bare wood and metal should be primed with Rustoleum surface primer. Bare plastic should be primed with Rustoleum plastic primer. Cap and/or label indicate approximate colour and finish. Cover surrounding areas to protect spray mist.

Application: Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use. Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart. 

Cleaning: Wipe wet paint from tip before storing, if the valve clogs during use, remove and rinse with white spirit.

Drying and recoating: Touch dry in 20 minutes. Hard dry in 24 hours. Recoat within 1 hour or after 24 hours.

Coverage: The can covers approximately 2m² per coat dependant upon surface profile/porosity.

Limitations: Do not use on galvanised steel or surfaces that regularly exceed temperatures over 90degrees. Apply only when temperature is between 10- 32degrees and relative humidity below 85%.